Ericsson and Altair Semiconductor report completing what they describe as the first network connection using enhanced Reduced Capability (eRedCap), a 3GPP Release 18 technology for IoT devices. The test paired Ericsson’s RAN software with Altair’s ALT1550 modem. Dima Feldman, vice president of product management and marketing at Altair Semiconductor, said the companies are working toward commercial deployments in 2027 (via iotinsider.com).
| Fact | Value |
|---|---|
| Standard | 3GPP Release 18 (eRedCap) |
| Test modem | Altair ALT1550 |
| Commercial deployments | Targeted for 2027 |
| Module availability | Targeted for 2026 to 2027 |
| Qualcomm chipset | Snapdragon X35 supports Release 17 RedCap |
What eRedCap changes over RedCap
eRedCap is an evolution of 5G Reduced Capability (RedCap), intended to extend 5G connectivity to devices that need lower data rates, simpler hardware and longer battery life.
Telco Magazine reported that Ericsson expects eRedCap devices to offer significantly improved battery life compared with comparable 4G devices. Actual performance will depend on use case, device design, network conditions and traffic patterns.
What devices could use eRedCap?
IoT Insider’s analysis lists smart city sensors, smart grid devices, asset trackers and monitoring equipment as potential eRedCap applications. Ericsson and Altair also identify wearables and AI-assistant devices as potential markets.
Dima Feldman said eRedCap could provide a longer-term connectivity option for critical infrastructure and support emerging AI-enabled consumer devices.
Which vendors are building eRedCap chipsets and modules?
According to Telco Magazine, Qualcomm’s Snapdragon X35 supports Release 17 RedCap, and Qualcomm is working on a successor that will support eRedCap. MediaTek, Sequans Communications and Telit Cinterion have eRedCap on their chipset roadmaps. Fibocom, Nordic Semiconductor, Quectel, Sierra Wireless (Semtech AirLink), Thales (Cinterion) and u-blox are module vendors targeting 2026 to 2027 for eRedCap availability.
eRedCap as a path from 4G to 5G Standalone
Reportedly, eRedCap could offer manufacturers a migration route from 4G-based IoT products to 5G Standalone networks, according to IoT Insider.
Johan Hultell, Head of Networks Strategy and Product Management at Ericsson, said eRedCap will help service providers expand their addressable market through a cost-efficient path from 4G IoT to 5G Standalone, and that it could widen the range of devices supported by 5G.
Ericsson expects eRedCap to help broaden the 5G Standalone device ecosystem, with wider adoption of these devices also driving 5G Standalone adoption.
Droam Perspective
For IoT device makers choosing a cellular platform, timing is the constraint. Feldman’s stated target is commercial deployment in 2027, and the module vendors named above target availability across 2026 and 2027. The test paired one RAN vendor with one modem, so it does not show multi-vendor interoperability.